Services & Maintenance

In the QM certificate, our quality management confirms at serial number level that the corresponding temperature control unit has successfully passed all specified quality tests and endurance tests during the end-of-line inspection and that all relevant values of the new unit are thus within the specified quality limits ex works.

Order No. 9449

The FAT lists all test points performed during the end-of-line test.

Order No. 9778

The factory certificate confirms that the products supplied meet the requirements of the order, without specifying tests or test results.

Order No. 10701

The factory certificate"Material of construction" lists all the materials that were used for the corresponding temperature control unit. If it is not a new order, the serial number must be specified.

Order No. 10367

Temperature stability @ -10 °C according to DIN 12876

Order No. 6252

Absolute accuracy according to DIN 12876.
If calibration is to be carried out on a newly ordered device, the points to be calibrated must be specified when ordering.

Order No. 10516

Absolute accuracy according to DIN 12876.
If calibration is to be carried out on a newly ordered device, the points to be calibrated must be specified when ordering.

Order No. 10517

Absolute accuracy according to DIN 12876.
If calibration is to be carried out on a newly ordered device, the points to be calibrated must be specified when ordering.

Order No. 6905

Regular inspection and maintenance of your temperature control unit is the best protection for avoiding downtimes, serves to ensure a long service life and value retention, and also ensures control accuracy and economic efficiency.

When concluding a maintenance contract with a term of three years, a discount of 10% is granted on the maintenance flat rate, from five units 20%. A further advantage is the price stability of the maintenance flat rate over the term of the contract.

Order No. 9665

To ensure reliable operation of our temperature control units, regular maintenance is recommended to avoid sudden failures and to save energy costs.

Regular maintenance of your temperature control unit is the best protection to avoid downtimes, serves to ensure a long service life and value retention and also ensures control accuracy and economic efficiency.

Order No. 9708

An F-Gas test can be carried out together with maintenance. Depending on the type of refrigerant and filling quantity, this is required by law for some temperature control units.

Order No. 9666

An F-Gas test can also be carried out without maintenance. Depending on the type of refrigerant and filling quantity, this is required by law for some temperature control units.

Order No. 10649

The installation protocol is provided in advance to make commissioning smoother for the customer and service technician. During commissioning, devices that have already been installed are put into operation and, if necessary, open questions from users are answered.

Order No. 10680